A TowerMat storage lift with 16 towers and over 350 cassettes in total, for the storage of tubes and bar materials, was constructed for a leading steel handler in Switzerland, BRÜTSCH & RÜEGGER METALS AG. 2 saws, including a BEHRINGER band saw, are connected to the dynamic storage system which provides a load capacity of 3000 kg per cassette. The whole long goods store was set in a 3 meter deep excavation to maximize its storage capacity. Loading and unloading takes place at a total of 3 loading and unloading stations. A lateral station is situated at the front, and two lengthwise stations at the level of the two saws. Operation is by the INTERTEX INT-DSC1 pre-selector control.
| Machine Type | TowerMat |
|---|---|
| Storage Type | Long Goods |
| Controller | Vorwahlsteuerung INT-DSC 1 |
| Capacity | 356 Carrier Type |
| Total Payload | 1.068.000 kg |
| Dimensions |
H 9.140 mm
W 8.900 mm
D 26.000 mm
|
Carrier 1
| Carrier Type | System cassettes |
|---|---|
| Amount | 80 |
| Payload | 3.000 kg |
| Dimensions |
H 150 mm
W 6.800 mm
D 830 mm
|
Carrier 2
| Carrier Type | System cassettes |
|---|---|
| Amount | 103 |
| Payload | 3.000 kg |
| Dimensions |
H 200 mm
W 6.800 mm
D 830 mm
|
Carrier 3
| Carrier Type | System cassettes |
|---|---|
| Amount | 96 |
| Payload | 3.000 kg |
| Dimensions |
H 250 mm
W 6.800 mm
D 830 mm
|
Carrier 4
| Carrier Type | System cassettes |
|---|---|
| Amount | 77 |
| Payload | 3.000 kg |
| Dimensions |
H 350 mm
W 6.800 mm
D 830 mm
|